
Installing an exterior elevator on an old apartment block is one of the solutions by which residents can improve the accessibility of the building without radically changing its interior structure. In Romania, many blocks built before the 1990s have no elevator, and climbing the stairs every day can become difficult for older people, families with small children or people with reduced mobility.
One of the first questions that arises when analyzing such a project is: does the exterior elevator stop directly at each floor, or at the intermediate landings between floors?
The answer depends on the configuration of the stairwell, the position of the entrances, the structure of the building and the type of elevator chosen. Both options are technically possible, but they do not offer the same level of comfort and accessibility.
Below, we explain the differences between the two solutions, the advantages of each and the aspects that must be analyzed before installing an exterior elevator on an apartment block.
How does an exterior elevator mounted on an existing apartment block work?
An exterior elevator is an elevator installed in a structure placed next to the building's facade. It can be made of metal elements and enclosure panels or can include glazed surfaces, depending on the project.
The elevator is connected to the building through access points built at the set levels. This way, residents can reach different floors without using the existing stairs for the whole way.
Unlike an elevator designed together with the block, a later installation means adapting the equipment to an existing structure.
For this reason, the position of the doors and the stopping levels must be set following a technical assessment.
Exterior elevator that stops directly at the floor
The most comfortable option for users is the one in which the elevator stops at the same level as the landing giving access to the apartments.
In this configuration, people leaving the elevator can reach the apartment door without going up or down additional steps, if the route between the elevator and the home is properly designed.
What are the advantages of stopping at the floor?
The main benefit is accessibility.
An exterior elevator that stops directly at the floor can be especially useful for:
- older people who have difficulty climbing stairs;
- wheelchair users;
- residents with temporarily reduced mobility;
- families with strollers;
- people carrying luggage or shopping.
In addition, this configuration can improve everyday comfort and the appeal of the homes in the building.
What difficulties can arise?
Installing an elevator that stops directly at the floor is not always simple.
In some blocks, the configuration of the stairs and landings does not allow direct access without major construction work.
Changes to the facade, new openings or connecting walkways may be needed.
These interventions must be analyzed by designers and structural engineers to determine whether they can be carried out safely.
Exterior elevator that stops between floors
Another solution found in existing blocks is installing an elevator that stops at the level of the intermediate landings of the stairwell.
This configuration is common in buildings where the stairs are organized in two flights, with an intermediate landing between the main levels.
In this case, residents exit the elevator onto the intermediate landing and have to go up or down a few steps to reach the level of the apartments.
Why is this option chosen?
In some buildings, the intermediate landing is easier to connect to an exterior structure.
This solution can reduce the extent of the construction changes and can simplify the integration of the elevator into the existing configuration.
However, the advantages depend on the particulars of each building. It cannot be assumed that stopping between floors is always cheaper or easier to carry out.
What is the main drawback?
The major drawback is that users still have to climb a number of steps.
For a person with no mobility problems, this may be a minor inconvenience.
For someone who uses a wheelchair or cannot climb stairs, however, the solution may be insufficient.
An elevator that stops between floors does not automatically ensure full accessibility to the apartments.
This must be clarified from the design stage, especially if the goal of the installation is to remove barriers for people with disabilities.
Which option is better: stopping at the floor or between floors?
The choice depends on the purpose of the project and the technical possibilities of the building.
| Criterion | Stop at the floor | Stop between floors |
|---|---|---|
| Access to the apartments | Can be done without steps | Usually requires climbing some steps |
| Wheelchair accessibility | Can provide accessibility, if the route is adapted | Usually does not provide full accessibility |
| Construction changes | Can be more complex | Can be simpler in certain buildings |
| Everyday comfort | High | Good, but with limitations |
| Installation cost | Depends on the project | Depends on the project |
For blocks where people with reduced mobility live, stopping directly at the floor is generally the preferable option.
However, the final decision must be based on a technical assessment and on an evaluation of the real installation possibilities.
Can an exterior elevator be installed on any apartment block?
Not all blocks allow an exterior elevator to be installed under the same conditions.
The feasibility of the project depends on several factors:
- the space available next to the facade;
- the load-bearing structure of the building;
- the configuration of the stairwell;
- the position of the windows and entrances;
- the existence of utility networks;
- the ground conditions;
- the applicable urban planning regulations.
For example, if the space between the block and another structure is very narrow, placing the exterior structure can be difficult.
Likewise, the changes needed to create the access points must be evaluated so that they do not affect the safety of the building.
What permits are needed to install an exterior elevator?
Mounting an exterior elevator on an existing block usually involves work on the common areas and on the facade.
The project may therefore require owners' consent under the applicable legislation, technical documentation, a building permit and specific approvals.
Depending on the situation, structural assessments and additional checks may be needed.
The elevator must also comply with the applicable technical requirements and the authorization and inspection procedures.
It is recommended that the homeowners' association clarify these aspects before ordering the equipment.
How much does it cost to install an exterior elevator on an apartment block?
The cost of an exterior elevator depends on the technical characteristics of the equipment and the complexity of the works required.
Factors that influence the price include:
- the number of floors served;
- the capacity of the elevator;
- the dimensions of the car;
- the type of exterior structure;
- the number and position of the access points;
- the foundation works;
- the construction changes;
- the electrical installations;
- the finishes and materials used.
Stopping directly at the floor may require additional works compared with stopping at the intermediate landing, but the cost difference must be assessed case by case.
To arrive at a realistic budget, it is important that the quote includes not only the equipment, but also the design, ancillary works, installation and commissioning.
How long does it take to install an exterior elevator?
The duration of the project depends on the complexity of the construction and the administrative steps required.
The process involves the technical assessment, design, obtaining approvals, preparing the site, delivering the equipment and the installation itself.
The actual installation can take significantly less time than the whole project, because obtaining the documentation and carrying out the preparatory works take time.
Proper planning allows the steps to be coordinated and reduces the risk of delays.
What should the homeowners' association analyze before making a decision?
Before choosing the equipment, the homeowners' association must establish the main objective of the investment.
If the aim is to improve general comfort, a solution that stops between floors may be acceptable for some of the residents.
If the objective is accessibility for people with disabilities or severely reduced mobility, the possibility of a step-free route all the way to the apartments must be analyzed as a priority.
Maintenance costs, energy consumption, periodic inspections and responsibilities for managing the elevator must also be taken into account.
Working with specialists in vertical transport systems is important for identifying a configuration that is safe, functional and adapted to the building.
Conclusion: where should the exterior elevator on an apartment block stop?
An exterior elevator on an apartment block can stop either directly at the floor or at the intermediate landing between floors. The choice depends on the structure of the building, the configuration of the stairwell, the available space and the goals of the residents.
Stopping directly at the floor generally offers a higher level of comfort and can allow step-free access all the way to the apartments. Stopping between floors can be easier to integrate into certain existing blocks, but it still requires the use of some steps.
For homeowners' associations considering installing an exterior elevator, the most important stage is the initial technical assessment. It makes it possible to compare the available options and choose a solution that meets the residents' needs, complies with safety requirements and can be used efficiently over the long term.









